| SoftPLC System Hardware
Options/Add-ons |
| Power Filtering & System Protection |
| Catalog Number |
Description |
| Uninterruptible Power Supply (UPS) |
| A UPS is strongly recommended for SoftPLC
Systems not only for power protection, but also where it is desirable that
power-loss conditions require safe shut-down and for the controller to start-up
where it left off and that any ladder logic modifications are saved when power
is resumed (retentive memory). |
| ICO-BP280 |
UPS (280VA) for 110V use. Includes smart serial
interface driver & custom communications cable. |
| ICO-BP280I |
UPS (280VA) for 220/240V use. Includes smart serial
interface driver & custom communications cable. |
| ICO-BWMB |
UPS Wall Mount Brackets for ICO-BP280 or
ICO-BP280I. |
| ICO-CAPC |
UPS Custom Communications Cable for use w/
SoftPLC. |
| Power Filters |
|
|
|
|
Also take a look at the
UPS Specifications
|
| I/O Interface Cards |
|
PC/104 options below are suitable for use with
SoftPLC In Tealware systems
utilizing a PBASE04 backplane, or other SoftPLC systems that support PC/104
cards.
For SoftPLC
Processor systems, SoftPLC Corporation will install and configure your
choice(s) of I/O interface cards and other options from the selections below
into your system if the products are purchased through SoftPLC (or one of their
distributors). Any special I/O network configuration software that may be
required for application specific configuration is included at no additional
charge with the I/O cards.
Other I/O Products: Cards for other I/O systems, direct
computer interface I/O modules, and more are also available. Call for
information and pricing.
|
| Catalog Number |
Description |
| Tealware I/O: For use with both local and/or remote Tealware
I/O equipment |
| PCCARD10 |
Tealware Interface Card, 1 port , ISA Bus |
| Allen-Bradley Remote I/O and/or Data Highway Plus: For use
with 1771, 1746 (SLC-500), Flex, Block, or other RIO compatible
devices |
| ICO-KTS |
Remote I/O Interface Card, 1 port, ISA bus. |
| ICO-KTX |
Remote I/O or DH+ Interface Card, 1 port, ISA bus. |
| ICO-KTXD |
Remote I/O and/or DH+ Interface Card, 2 ports, ISA
bus. |
| GE
Fanuc Series 90TM/30 I/O: |
| ICO-GEPIF |
GE 90/30 Remote I/O Interface Card, 1 port, ISA
bus. |
| ICO-GEPIF104 |
GE 90/30 Remote I/O Interface Card, 1 port, PC/104
bus. |
| DeviceNet: For use with all DeviceNet compatible
devices |
| ICO-DN |
DeviceNet Scanner Card, 8 bit, ISA Bus |
| ICO-DNP |
DeviceNet Scanner Card, Pro Model 16 bit, ISA Bus |
| ICO-DN104 |
DeviceNet Scanner Card, 8 bit, PC/104 Bus |
| ICO-DNP104 |
DeviceNet Scanner Card, Pro Model 16 bit, PC/104
Bus |
| Profibus DP: For use with all Profibus DP and PA compatible
devices |
| ICO-DPM30 |
Profibus DP Master Card, ISA Bus |
| ICO-DPM104 |
Profibus DP Master Card, PC-104 Bus |
| ICO-DPS |
Profibus DP Slave Card, ISA Bus |
| ICO-DPS104 |
Profibus DP Slave Card, PC-104 Bus |
| Interbus: For use with all Interbus compatible
devices |
| ICO-IBM30 |
Interbus Master Card, ISA Bus |
| ICO-IBM104 |
Interbus Master Card, PC-104 Bus |
|
| Communication Cards |
|
PC/104 options below are suitable for use with
SoftPLC In Tealware systems
utilizing a PBASE04 backplane, or other SoftPLC systems that support PC/104
cards.
For SoftPLC
Processor systems, SoftPLC Corporation will install and configure your
choice(s) of communication cards and other options from the selections below
into your system if the products are purchased through SoftPLC (or one of their
distributors).
|
| SoftPLC Catalog Number |
Description |
| Add-on Serial (COM) Port cards |
| ICO-PI2-RS232 |
2 Port RS-232 DB9 add-on serial card for ISA Bus. |
| ICO-DCB-8 |
Digi ClassicBoard 8 port add-on serial card for ISA
Bus. |
| ICO-DC25-8 |
8 Port DB25 Breakout Box for Digi ClassicBoard |
| ICO-SER104-2 |
2 Port Serial Card, PC/104 bus. Includes cable. |
| ICO-SER104-8 |
8 Port Serial Card, PC/104 bus. Includes cables. |
| Data Highway/Data Highway Plus cards |
| ICO-DHA |
Data Highway or Data Highway Plus Interface Card, 1
port, ISA bus. |
| ICO-DH104 |
Data Highway or Data Highway Plus Interface Card, 1
port, PC/104 bus. |
| ICO-KTX |
Remote I/O or DH+ Interface Card, 1 port, ISA bus. |
| ICO-KTXD |
Remote I/O and/or DH+ Interface Card, 2 ports, ISA
bus. |
| Ethernet cards |
| ICO-IKE10 |
Kingston EtherRx Card, ISA bus. NE2000 compatible. |
| ICO-PKE100 |
Ethernet Card (10/100MB), PCI bus. Tulip chip
compatible. |
| DeviceNet: For use with all DeviceNet compatible
devices |
| ICO-DN |
DeviceNet Scanner Card, 8 bit, ISA Bus |
| ICO-DNP |
DeviceNet Scanner Card, Pro Model 16 bit, ISA Bus |
| ICO-DN104 |
DeviceNet Scanner Card, 8 bit, PC/104 Bus |
| ICO-DNP104 |
DeviceNet Scanner Card, Pro Model 16 bit, PC/104
Bus |
| Profibus DP: For use with all Profibus DP and PA compatible
devices |
| ICO-DPM30 |
Profibus DP Master Card, ISA Bus |
| ICO-DPM104 |
Profibus DP Master Card, PC-104 Bus |
| ICO-DPS |
Profibus DP Slave Card, ISA Bus |
| ICO-DPS104 |
Profibus DP Slave Card, PC-104 Bus |
| Interbus: For use with all Interbus compatible
devices |
| ICO-IBM30 |
Interbus Master Card, ISA Bus |
| ICO-IBM104 |
Interbus Master Card, PC-104 Bus |
|
| Miscellaneous Options/Spare Parts |
| SoftPLC Catalog Number |
Description |
| Drives. |
| ICO-PCIDE |
ATA Adapter for PCMCIA Memory for 6 & 8 slot
SoftPLC Processor systems. |
| ICO-PC16ATA |
16MB PCMCIA ATA Flash Card for PCIDE drive. |
| ICO-T35 |
3.5" Floppy Drive for 6 & 8 slot SoftPLC Processor
systems. |
| ICO-HD4G |
3.5" 4.5GB Hard Drive for 6 & 8 slot SoftPLC
Processor systems. |
| Additional Memory: Factory updates to Tealware CPUs or SoftPLC
Processor systems |
| ICO-DOC16 |
Flash Disk-On-Chip (DOC) Upgrade to 16MB Total |
| ICO-DOC24 |
Flash Disk-On-Chip (DOC) Upgrade to 24MB Total |
| ICO-DOC32 |
Flash Disk-On-Chip (DOC) Upgrade to 32MB Total |
| ICO-DOC48 |
Flash Disk-On-Chip (DOC) Upgrade to 48MB Total |
| ICO-DOC64 |
Flash Disk-On-Chip (DOC) Upgrade to 64MB Total |
| ICO-M72PIN |
Additional DRAM memory (available sizes vary by CPU
model) |
| CPU Upgrades |
| ICO-233 |
Upgrade P5-133 to P266-MMX CPU |
| Cables |
| TD2-CAM |
PLC-2 Attached Mode Cable for use with TOPDOC
PLC-2. |
| TD2-CAMPS |
Optional Power Supply for PLC-2 Attached Mode
Cable. |
| ICO-CEC |
6 foot Ethernet Cross-Over Cable. |
| ICO-CNM |
6 foot serial Null Modem Cable. |
|
Per Contattare Tex-El di Guasco Enrico |
© Copyright 2001 SoftPLC
Corporation
|