Prendete una CPU con SoftPLC, aggiungete i sistemi di I/O di vostra scelta, ed avrete un sistema PLC e-Automation dotato di...

• architettura aperta . . .
• enorme quantita' di memoria . . .
• eccezionalmente potente . . .
• super veloce . . .
• ed ancora a basso costo . . .

SoftPLC Corp. e Tex-El offrono una grande varieta' di case industriali, schede CPU, ed altre opzioni, (come interfacce I/O, schede di rete, ecc.) e completano questo hardware affidabile con il software di controllo SoftPLC. Il risultato e' un sistema di controllo a base PC pronto per essere programmato ed utilizzato nelle vostre applicazioni.

Con un singolo ordine e' possibile avere tutti i componenti necessari alla vostra applicazione. E' compresa l'installazione hardware, la configurazione ed il test a livello di sistema, dandovi cosi' la possibilita' dei non preoccuparvi di altro che della vostra applicazione.

Una tipica CPU SoftPLC comprende il contenitore, la scheda PC SBC completa di memoria RAM, disco Flash, ethernet, porte seriali/parallela, le opzioni scelte da voi come schede di interfaccia I/O, ed l'installazione/configurazione software di SoftPLC software. Le caratteristiche compatte e di robustezza di questi sistemi li rendono adatti ad impieghi in ambienti in cui shock, vibrazioni, polvere o alte temperature, richierebbero di danneggiare computer non-industriali. In piu',voi avete un sistema ad architettura aperta che e' piu' potente e flessibile della maggior parte dei "PLC", ad un prezzo ragionevole. Il listino Italiano (per sistemi completi, hardware e software) parte da circa Û 2.900,00 per sistemi aventi affidabilita' e prestazioni superiori a quelli di CPU di alto/altissimo livello di qualsiasi PLC sul mercato!

La configurazione standard dei sistemi comprende:

• Chassis Industrial (4, 6 oppure 8 slots) in acciaio con supporti per il montaggio e backplane passivo
Chassis 4-Slot schede half-size (486 DX4 100) Chassis 4-Slot schede half-size (Pentium/Celeron) 6-Slot Half-Size 6-Slot Full-Size 8-Slot Processors
• Alimentatore
• CPU con 8 Mb RAM, 8 Mb disco a stato solido o flash memory
• Porte di Communicazione - (2) Seriali, (1) Parallela
• 10 MB Ethernet
• DOS 6.22
• Installazione/Configurazione/Test del software SoftPLC
• 1 Anno di garanzia
• Altre Opzioni variano da un modello all'altro o possono essere aggiunte in base a specifiche del cliente. (es: sara' necessario specificare l'interfaccia per gli I/O e la tipologia)

La CPU SoftPLC IC4-IH4D-16M8F e' un sistema compatto, 4-slot, industriale progettato per sistemi di controllo integrati ed altre applicazioni in cui lo spazio sia limitato. Le caratteristiche di robustezza e compattezza lo rendono ideale per ambienti in cui shock, vibrazioni, polvere o alte temperature, richierebbero di danneggiare computer non-industriali. Questi sistemi basati su processore 486DX4 100, sono potenti pur mantenendo bassi i costi. I sistemi base sono equipaggiati con 16Mb RAM e 8Mb Flash.

Standard System Features

Single Board CPU

• 486-DX4-100 CPU w/ VGA and PS/2 keyboard ports
• 16MB SDRAM, expandable to 32MB
• 8MB flash disk-on-chip, expandable to 288MB
• built-in PC/104 expansion bus
• 2 serial ports, 1 parallel port
• 10MB Ethernet port
• 3 free slots available for your selected options

Enclosure

• Heavy duty steel construction
• The chassis may be mounted bi-directionally with the included brackets, allowing for flexibility of cabinet installation
• Compact, rugged, easy-to-access chassis design (just 6 screws attaching the cover to the chassis)
• 4-Slot ISA bus (PC/AT compatible) passive backplane that supports half-size PC cards
• Positive air pressure in chassis repels dust

Size/Weight

• Dimensions: 4-1/2" W x 7-7/8" H x 9-5/8" D, 114mm W x 197mm H x 245mm D
• Net Weight: 6lb (2.8kg)

Power Supply

• Output Rating: 65 Watts maximum
• Output Voltages: +5V DC @ 5A, +12V DC @ 1.7A, -12V DC @ 1.7A
• Input Voltages: 85V AC to 264V AC
• Input Frequency: 50 to 60 Hz
• Standards: Meets UL, CSA, TUV safety standards and FCC and VDE Class A EMI standards, CE Compliant

Specifications

• Operating Temperature: 0 to 50°C
• Storage Temperature: -20 to 85°C
• MTBF: 50,000 hours
• Altitude: 0 to 10,000 feet
• Humidity: 5% to 95% non-condensing
• Vibration (operating): 5 to 15 Hz, 0.25" peak to peak; 15 to 500 Hz, 2.5G peak to peak
• Backplane PC Board: 4 layer PCB with ground and power planes for reduced noise and lower power supply impedance
• Cooling: One 49-CFM fan with removable air filter

A simple, streamlined system perfect for most applications!

These SoftPLC Processors are compact 4-slot industrial controllers designed for systems with minimal I/O interfaces or communication ports required, or where limited space is available, and high-speed processing or e-Automation is required. IC4-IHP5-32M8F are Pentium 233MHz based systems and IC4-IHC5-32M8F (shown) are Celeron-500MHz based systems, both equipped with 32MB RAM and 8MB Flash Disk.

Standard System Features

IC4-IHP5-32M8F

• Single board CPU w/ Pentium 233 MMX w/ VGA and PS/2 keyboard ports
• 32MB SDRAM, expandable to 128MB
• 8MB flash "Disk On Chip®", expandable to 288MB
• built-in PC/104 expansion bus and EIDE drive interface/controller
• 1 RS-232/422/485 port, 1 RS-232 port, 1 parallel port
• 10MB Ethernet card
• 2 free slots available for your selected options

IC4-IHC5-32M8F

• Single board CPU w/ Celeron 500MHz w/ VGA and PS/2 keyboard ports
• 32MB SDRAM, expandable to 256MB
• 8MB flash "Disk On Chip®", expandable to 288MB
• built-in PC/104 expansion bus and EIDE drive interface/controller
• 1 RS-232/422/485 port, 1 RS-232 port, 1 parallel port
• 10/100MB Ethernet port
• 3 free slots available for your selected options

Enclosure

• Heavy duty steel construction
• The chassis may be mounted bi-directionally with the included brackets, allowing for flexibility of cabinet installation
• Compact, rugged, easy-to-access chassis design (just 6 screws attaching the cover to the chassis)
• 4-Slot ISA (PC/AT compatible) passive backplane that supports half-size PC cards
• Positive air pressure in chassis repels dust
• Space for 3.5" Hard Drive (not included)
• Space for 3.5" Floppy Drive (not included)

Size/Weight

• Dimensions: 6.1" W x 7.8" H x 9.7" D, 155mm W x 198mm H x 247mm D
• Net Weight: 7.7lb (3.5kg)

Power Supply

• Output Rating: 150 Watts maximum
• Output Voltages: +5V DC @ 15A, +12V DC @ 5.5A, -12V DC @ 0.57A
• Input Voltages: 95 to 132V AC or 190 to 260V AC
• Input Frequency: 47 to 63 Hz
• LEDs for +5V, +12V and -12V
• Standards: Meets UL, CSA, TUV safety standards and FCC and VDE Class A EMI standards, CE Compliant

Specifications

• Operating Temperature: 0 to 50°C
• Storage Temperature: -20 to 85°C
• MTBF: 50,000 hours
• Altitude: 0 to 10,000 feet
• Humidity: 5% to 95% non-condensing
• Vibration (operating): 5 to 15 Hz, 0.25" peak to peak; 15 to 500 Hz, 2.5G peak to peak
• Backplane PC Board: 4 layer PCB with ground and power planes for reduced noise and lower power supply impedance
• System Cooling: One 49-CFM fan with removable air filter
• Power Cooling: Two 6.8 CFM, 4 cm ball-bearing fans

Our most popular models!

These SoftPLC Processors are compact 6-slot industrial controllers designed for systems with several I/O interfaces or communication ports required, where limited space is available, and high-speed processing or e-Automation is required. IC6-IHP5-32M8F are Pentium 233MHz based systems and IC6-IHC5-32M8F (shown) are Celeron-500MHz based systems, both equipped with 32MB RAM and 8MB Flash Disk.

Standard System Features

IC6-IHP5-32M8F

• Single board CPU w/ Pentium 233 MMX w/ VGA and PS/2 keyboard ports
• 32MB SDRAM, expandable to 128MB
• 8MB flash "Disk On Chip®", expandable to 288MB
• built-in PC/104 expansion bus and EIDE drive interface/controller
• 1 RS-232/422/485 port, 1 RS-232 port, 1 parallel port
• 10MB Ethernet card
• 3 free slots available for your selected options

IC6-IHC5-32M8F

• Single board CPU w/ Celeron 500MHz w/ VGA and PS/2 keyboard ports
• 32MB SDRAM, expandable to 256MB
• 8MB flash "Disk On Chip®", expandable to 288MB
• built-in PC/104 expansion bus and EIDE drive interface/controller
• 1 RS-232/422/485 port, 1 RS-232 port, 1 parallel port
• 10/100MB Ethernet port
• 4 free slots available for your selected options

Enclosure

• Heavy duty steel construction
• Mounting brackets included
• Compact, rugged, easy-to-access chassis design
• 6-Slot ISA (PC/AT compatible) passive backplane that supports half-size PC cards
• Positive air pressure in chassis repels dust
• Space for 3.5" Hard Drive (not included)
• Space for 3.5" Floppy Drive (not included)

Size/Weight

• Dimensions: 7-3/4" W x 6-3/4" H x 11-3/8" D, 196mm W x 170mm H x 287mm D
• Net Weight: 9.9lb (4.5kg)

Power Supply

• Output Rating: 110 Watts maximum
• Output Voltages: +5V DC @ 9A, +12V DC @ 3.5A, -5V DC @ 0.75A, -12V DC @ 0.75A
• Input Voltages: 90 to 264V AC
• Input Frequency: 47 to 63 Hz
• Standards: Meets UL, CSA, TUV safety standards and FCC and VDE Class A EMI standards

Specifications

• Operating Temperature: 0 to 50°C
• Storage Temperature: -20 to 85°C
• MTBF: 50,000 hours @ 70% load
• Altitude: 0 to 10,000 feet
• Humidity: 10% to 95% @ 40^oC non-condensing
• Vibration (operating): 5 to 17 Hz, 0.1" peak to peak; 17 to 500 Hz, 1.5G peak to peak
• Backplane PC Board: 4 layer PCB with ground and power planes for reduced noise and lower power supply impedance
• System Cooling: One 49-CFM fan with removable air filter
• CE Compliant

The IC6-PFx model was selected by the US Army Corps of Engineers - Hydroelectric Design Center as the standard process controller for large hydro power generating plants. These systems are currently generating over 3% of power in the USA!

These SoftPLC Processors are 6-slot industrial controllers designed for systems with several I/O interfaces or communication ports required, where PCI slots are needed, or where a larger capacity power supply than our half-size 6 slot systems is required. SoftPLC offers 4 full size 6-slot enclosure options. These systems still install in a fairly limited space. Four configurations are available. All base systems are equipped with 32MB RAM and 8MB Flash Disk. Multiple free slots are available for your selected options (see table below).

1. IC6-IFP5-32M8F is a full size chassis with 6 ISA slots equipped with a Pentium 233 MMX CPU
2. IC6-IFC5-32M8F is a full size chassis with 6 ISA slots equipped with a Celeron 500MHz CPU
3. IC6-PFP5-32M8F is a full size chassis with 1 CPU, 2 PCI, and 3 ISA slots equipped with a low power Pentium 266 MMX CPU
4. IC6-PFP5-32M8F is a full size chassis with 1 CPU, 2 PCI, and 3 ISA slots equipped with a Celeron 500MHz CPU

Standard System Features

Single Board CPU

• Single board CPU (see table) w/ VGA and PS/2 keyboard ports
• 32MB SDRAM, expandable
• 8MB flash "Disk On Chip®", expandable
• Built-in PC/104 expansion bus and EIDE drive interface/controller
• (2) RS-232 ports, (1) parallel port
• Ethernet (see table)

Enclosure

• Heavy duty steel construction
• Mounting brackets included
• Compact, rugged, easy-to-access chassis design with hold-down clamp to protect plug-in cards against vibration
• Passive backplane (IC6-IFx includes 6 ISA slots, IC6-PFx includes 1 CPU/2 PCI/3 ISA slots)
• LEDs for power on/off
• Space for 3.5" Hard Drive inside (not included)
• Space for front accessible 3.5" Floppy Drives (not included)
• Power ON/OFF switch, system reset switch

Size/Weight

• Dimensions: 6.5" W x 6.7" H x 15.5" D, 166mm W x 170mm H x 393mm D
• Net Weight: 12.3lb (5.6kg)

Power Supply

• Output Rating: 150 Watts maximum
• Output Voltages: +5V DC @ 15A, +12V DC @ 5A, -5V DC @1A, -12V DC @ 1A
• Input Voltages: 90 to 132V AC or 180 to 264V AC
• Input Frequency: 47 to 63 Hz
• Standards: Meets UL, CSA, TUV safety standards and meets FCC/VDE Class A EMI

Specifications

• Operating Temperature: 0 to 50°C
• MTBF: 50,000 hours @ 70% load
• Humidity: 10% to 95% non-condensing
• Backplane PC Board: 4 layer PCB with ground and power planes for reduced noise and lower power supply impedance
• System Cooling: One 49-CFM fan w/ air filter
• CE Compliant

Ideal systems for larger or more complex applications!

These SoftPLC Processors are 8-slot industrial controllers designed for systems with many I/O interfaces, device interfaces, or communication ports required, yet still install in a limited-space. Four configurations are available. All base systems are equipped with 32MB RAM and 8MB Flash Disk. Multiple free slots are available for your selected options (see table below).

1. IC8-IFP5-32M8F is a full size chassis with 8 ISA slots equipped with a Pentium 233 MMX CPU
2. IC8-IFC5-32M8F is a full size chassis with 8 ISA slots equipped with a Celeron 500MHz CPU
3. IC8-PFP5-32M8F is a full size chassis with 1 CPU, 3 PCI, and 4 ISA slots equipped with a low power Pentium 266 MMX CPU
4. IC8-PFP5-32M8F is a full size chassis with 1 CPU, 3 PCI, and 4 ISA slots equipped with a Celeron 500MHz CPU

Standard System Features

Single Board CPU

• Single board CPU (see table) w/ VGA and PS/2 keyboard ports
• 32MB SDRAM, expandable
• 8MB flash "Disk On Chip®", expandable
• Built-in PC/104 expansion bus and EIDE drive interface/controller
• (2) RS-232 ports, (1) parallel port
• Ethernet (see table)

Enclosure

• Heavy duty steel construction
• Mounting brackets included
• Compact, rugged, easy-to-access chassis design with hold-down clamp to protect plug-in cards against vibration
• Passive backplane (IC8-IFx includes 8 ISA slots, IC8-PFx includes 1 CPU/3 PCI/4 ISA slots)
• Centralized system for monitoring failure of cooling fan, high temperature, and voltage - (8) LEDs on front panel display system status
• Space for 3.5" Hard Drive inside(not included)
• Space for front accessible (1) 3.5" and (1) 5.25" Floppy Drives (not included)
• Power ON/OFF switch, system reset micro-switch

Size/Weight

• Dimensions: 9.5" W x 16.6" H x 10.1" D, 241mm W x 422mm H x 256mm D
• Net Weight: 17.6lb (8kg)

Power Supply

• Output Rating: 250 Watts maximum
• Output Voltages: +5V DC @ 25A, +12V DC @ 10A, -5V DC @0.5A, -12V DC @ 0.5A
• Input Voltages: 90 to 130V AC or 180 to 260V AC
• Input Frequency: 47 to 63 Hz
• Standards: Meets UL, CSA, TUV safety standards

Specifications

• Operating Temperature: 0 to 50°C
• MTBF: 50,000 hours
• Humidity: 5% to 95% non-condensing
• Backplane PC Board: 4 layer PCB with ground and power planes for reduced noise and lower power supply impedance
• System Cooling: Two 9cm ball-bearing fans
• Removable air filter at front panel
• CE Compliant

When ordering a SoftPLC Processor, specify the Processor catalog number followed by the suffix specifying the size of the SoftPLC Kernel to be installed (eg: -1K, -2K, or -8K). Then, specify any options separately by catalog number. Of course, your SoftPLC Distributor or sales representative can help ensure you select the proper components for your application.

For example, a 6 slot half size Celeron based system with capability for 250 inputs and 384 outputs of Profibus I/O, equipped with 4 serial ports would be:

• SoftPLC Processor: IC6-IHC5-32M8F-1K
• Profibus I/O Interface Card: ICO-DPM30
• 2 Extra serial ports: ICO-PI2-RS232
• UPS (unmounted): ICO-BP280